Philips Ballasts for SDW Lamps
Every type of Gas Discharge Lamp require Ballast that regulates the power the lamp will receive. When choosing the right Ballast for you Gas Discharge Lamps it is important to know how many bulbs you want to connect and the total wattage. In this category you will find Philips Ballasts for SDW Lamps. Any-Lamp offers you cheap Philips Ballasts for SDW Lamps and a fast delivery!
More:
Filter inCategory
Current refinements:
Ballast for bulb type
Length
Colour Rendering (Ra)
i
The colour rendering index (CRI) indicates how accurately colours are represented under a beam of light. The index goes from 1 to 99, with a CRI of 1 being the poorest and a CRI of 99 being the best possible. Be careful not to confuse colour rendering with colour temperature (K).
Colour Code
i
The colour code is a combination of the colour rendering index (CRI) and the colour temperature (K). The first number refers to the CRI (1 = very poor colour rendering, 9 = maximum accuracy). The second and third numbers refer to the colour temperature. For example, a light with a colour code of 830 has very good colour rendering and produces a warm white light.
Colour of material
Beam Angle (degree)
i
The beam angle indicates the spread of the light in degrees. Small beam angles are preferred for accent lighting, while larger beam angles are for general lighting purposes.
Cut out (mm)
For bulb power (W)
Voltage (V)
Luminous flux (lm)
i
Wattage VS Luminous Flux
| LUMEN | INCANDESCENT | LED | CFL | HALOGEN |
|---|---|---|---|---|
| 200 - 300 Lm | 25 Watt | 2 Watt | 5 Watt | 20 Watt |
| 300 - 500 Lm | 40 Watt | 6 Watt | 7 Watt | 28 Watt |
| 500 - 800 Lm | 60 Watt | 9 Watt | 12 Watt | 42 Watt |
| 700 - 1000 Lm | 75 Watt | 10 Watt | 14 Watt | 53 Watt |
| > 1000 Lm | 100 Watt | >15 Watt | >16 Watt | >70 Watt |
Luminous flux (in lumens) is a measure of the total amount of light a lamp puts out. Wattage is the amount of watt a bulb uses in 1 hour. We've long identified bulbs by their wattage, but that is actually a measure of electricity, not the brightness of a bulb. The amount of light a bulb generates is measured in lumens. An incandescent 60-watt bulb, for example, gives off 750 lumens of light and LED bulbs can deliver the same amount of light using as little as 9 Watt! The amount of Lumen divided by the wattage will show you which lamps are most energy efficient.
Tiltable
Width (mm)
Diameter (mm)
Dimmable
Automatic test option
Continuous light
Emergency Lighting
i
A bulb with an emergency unit will continue to glow when the power shuts down, allowing people to leave a building safely.
Exact shape
Accessories for bulb type
Number of pins
i
It’s important that you pick a bulb with the same socket type as your current bulb in order for it to be compatible with your light fixture. A lamp with a 2-pin socket type uses a starter and a conventional ballast. A 4-pin socket type works in combination with an electronic ballast without a starter.
Reflector
Type of accessories
Colour of the Fixture
Shape of the fixture
Input Voltage (V)
Output Voltage (V)
Height (mm)
Impact Protection (IK)
i
IK rating stands for impact protection. That is the rate of protection against vandalism and external impact, and is indicated in numbers from 00 to 10. IK00 means no protection and IK10 means protection against strong impacts.
Bulb finish
Including bulb
Amount of bulbs required
LED panel size
Length (mm)
Length Config (mm)
Colour temperature (Kelvin)
i
The colour temperature refers to the colour produced by a light. It's measured in Kelvin (K) and ranges from warm white (1700K - 3000K) to daylight white (6500K). Neutral white (3100K - 5000K) is mainly used for general lighting applications.
Light Distribution
Light Output (Lumen)
i
Lumen (lm) is the term used to describe the total amount of visible light emitted by a light source. The higher the number of lumens, the brighter it is.
Brand
Mounting
Price View
Features
Series
Product Type Category
IP-Rating
i
An IP rating consists of two numbers: the first number (0 - 6) relates to the level of protection against solid objects (including dust), the second number (0 - 8) relates to the level of protection against water.
IP20 - safe from objects > 12.5 mm
IP40 - safe from objects > 1 mm
IP44 - safe from objects > 1 mm & splashproof
IP54 - dust safe & splashproof
IP65 - dustproof & waterproof
IP66 - dustproof & fully waterproof
Product Line
Replaces (Watt)
i
Select the wattage of your conventional bulb to find the LED equivalent.
Rotatable
i
Conventional fluorescent tubes emit light in every direction (360°), including towards the ceiling where light is not needed. LED tubes have a beam angle of 120° so light is only directed where you need it. LED tubes are therefore rotatable by 90°, allowing you to adjust the beam of the light to match your preferences and fixtures.
sales
Savings per year
i
SAVINGS PER YEAR
Any-Lamp provides energy saving calculations. By switching from your current light to this product you can save energy and maintenance costs. This is calculated based on usage 12 hours a day, 365 days per year. Replace your current light and start saving today.
Sensor Protocol
Sensor Included
i
A light with a sensor can turn on automatically. Depending on the sensor it has, this can be whenever it detects motion or a lack of light, or both.
Shape
Cap / Base
i
The cap/base of a bulb is the part that connects it to the socket in the fixture. In the UK, B22 (Bayonet) caps/bases are still the most popular, although E27 (Edison screw) caps/bases are becoming increasingly popular. GU10 is the most common cap/base for spotlights. Check which cap/base you need carefully as many other types are also available.
LED Starter included
Suitable for bulb type
Suitable for
Technology
Length
Type of sensor
Unified Glare Rating
i
The Unified Glare Rating indicates the amount of blinding glare emitted by a light and, therefore, its potential to cause visual comfort. In offices the UGR rating should be <19, while in public areas <22 is sufficient.
Wattage
Wattage range Accessories
Width (mm)
halogen led watt match
Average Lifetime (h)
Beam Angle (degree)
Diameter (mm)
Cut out (mm)
Diameter (mm)
Dimmable
Height (mm)
Length (mm)
Length (mm)
Length (mm)
Length (mm)
Colour temperature (Kelvin)
Luminous flux (lm)
Light Output (Lumen)
Replaces (Watt)
Replaces (Watt)
Wattage
Wattage
Wattage
Replaces (Watt)
Wattage
Width (mm)
Show products
Current search
1-3 out of 3
results found
Filter
Sort by
