Noxion LED Dimmer RLC 0-150W 230V
Specifications
| SKU | 237551 | |
|---|---|---|
| EAN | 8719157010429 | |
| Manufacturer Name | Nox LED DIMMER RLC 0-150W 230V | |
|
i
The recommended quantity refers to the number of products pre-packaged by the manufacturer. When you buy this quantity, we deliver the products in the original package from the manufacturer.
|
Full box quantity | 5 |
| Input Voltage (V) | 230 | |
|---|---|---|
|
i
Lighting with a voltage of 220-240 Volt can be connected directly to the mains. Lighting with a different mains voltage (12 Volt and 24 Volt) requires an (electronic) transformer.
|
Voltage (V) | 220-240 |
|
i
The IP value indicates the degree of protection against the ingress of moisture and dust. The 1st digit (0 = not protected until 6 = completely dustproof) indicates the protection against dust. The 2nd digit (0 = not protected until 8 = protected against immersion) indicates the protection against water. Products with an IP44 rating are splashproof and products with an IP65 rating or higher are (completely) dustproof and waterproof. |
IP-Rating | IP20 |
| Colour of the Fixture | White | |
| Colour of material | White | |
| Ballast for bulb type | PL-C | |
|
i
This filter allows you to refine your search by selecting specific types of light sources. Choose from options such as LED bulbs, LED tubes, or LED spots to find the perfect lighting solution for your needs.
|
Product Type Category | Accessory - Dimmer |
|
i
It may happen that the length of this product differs from your old lighting fixture. As a result, the product does not fit in your current fixture or in the relevant place.
|
Length (mm) | 70 |
|---|---|---|
| Height (mm) | 23 | |
| Width (mm) | 70 |
Description Noxion LED Dimmer RLC 0-150W 230V
Highlights
- Noxion LED dimmer switch
- Phase-cut dimmer (leading edge & trailing edge)
- Works from 0W to 150W with LED
- Safety features
- 2-wire connection
- Suitable for different cover plates
Noxion LED dimmer switch
The Noxion LED Dimmer switch is perfect for new installations as well as existing ones. It's compatible with all phase-cut dimmable light sources.
Phase-cut dimmer (leading edge & trailing edge)
A phase-cut dimmer works by cutting the voltage that reaches the light in order to dim it. This can be done in one of two ways:
- Leading Edge (forward phase cut) - the first half of the voltage waveform is cut off
- Trailing Edge (reverse phase cut) - the second half of the voltage waveform is cut off
The Noxion LED dimmer has a switch that allows you to select either Leading Edge or Trailing Edge phase-cut dimming depending on your requirements.
Trailing Edge phase cutting offers better performance and allows for soft starts that ensure the lifespan of bulbs are not diminished.
Works from 0W to 150W with LED
This dimmer switch works with wattages from 0 to 150 with LED bulbs. When used with halogen or incandescent bulbs, the maximum wattage is 300!
Safety features
For extra safety, the Noxion LED dimmer has built-in protection against short circuits, overloads and extreme temperatures.
2-wire connection
The Noxion LED Dimmer connects to switched live and live wires. It's recommended that the installation of the dimmer switch on a mains power supply (230V) is done by a qualified electrician.
Suitable for different cover plates
The Noxion LED dimmer is compatible with lots of different cover plates so that you can choose the one you like best.
For more information about the Noxion LED dimmer, take a look at the video by clicking on the link next to the product image.