Noxion Batten Waterproof 150cm for 2x58W LED Tubes (EM)
Free shipment from £108 incl. Tax£90 excl. Tax
Specifications Noxion Batten Waterproof 150cm for 2x58W LED Tubes (EM)
|Manufacturer Name||Noxion LED TL Waterproof Housing 2x58W 1500mm|
|Energy efficiency class||A||
The European Union has drawn up guidelines for energy labels for lighting. The energy efficiency of bulbs and luminaires is expressed in classes (A to G). Energy label A is the most efficient and energy label G the least. The energy label is also stated on the packaging of a product.
|Energy efficiency class old||A|
The technology indicates the operating base of a light source. The most well-known and energy-efficient example is LED. Other techniques include Halogen, gas discharge, TL (fluorescent) and the light bulb.
This indicates which wattage of your old/conventional lighting is replaced by this LED product.
When you dim lights, the full power does not have to be used. You therefore save extra on energy costs. Dimmable lamps can also be used to create an extra cosy atmosphere. Keep in mind that you need a LED dimmer to dim LED lights.
|Suitable for Outdoor||Yes|
|Fixture Connection||Screw [Screw connector]|
The IP value indicates the degree of protection against the ingress of moisture and dust. The 1st digit (0 = not protected until 6 = completely dustproof) indicates the protection against dust. The 2nd digit (0 = not protected until 8 = protected against immersion) indicates the protection against water. Products with an IP44 rating are splashproof and products with an IP65 rating or higher are (completely) dustproof and waterproof.
|Impact Protection (IK)||IK08||
The impact protection value (IK) stands for impact resistance and protection against vandalism. This is expressed in combination with 2 digits (IK00 - IK10). Products with IK00 are not protected against resistance. Products with IK10 offer resistance to shocks of 20 Joule and are also vandal-proof.
|Operating Temperature||-10 till +40|
|Colour of the Fixture||Grey|
Lighting with a built-in emergency lighting unit (battery) continues to burn for a certain time if the power fails.
It may happen that the length of this product differs from your old lighting fixture. As a result, the product does not fit in your current fixture or in the relevant place.
Lighting with a sensor or twilight switch only lights up when it receives a certain signal. This reduces energy costs. The (built-in) sensors react to darkness and/or movement.
Description Noxion Batten Waterproof 150cm for 2x58W LED Tubes (EM)
- Application: Industries, warehouses, parking garages, supermarkets etc.
- Easy & quick installation
- Compatible with EM LED tubes
- For LED-tube 150 cm
- LED-tubes have a long lifetime
- Waterproof: IP65
- Impact resistance IK08
- Withstands temperatures between -15 and +35 degrees C
Noxion LED Batten is a waterproof fixture which is compatible with LED-tubes. It is a perfect solution if you need to update your old TL-fixtures. The fixture can be used in homes, industries, warehouses, parking garages, supermarkets etc. Lighting in these environments need to be on for most of the day which is why switching to an energy efficient LED-solution will benefit your overall operation cost.
Easy and quick installation
These waterproof battens are easy to install. The installation is simple since the only tool you need is a screwdriver. These fixtures are compatible with LED tubes. Note that for this fixture a LED tube with starter is necessary. Switching to sustainable LED is possible regardless of budget.
Compatible with EM LED tubes
This fixture is not integrated with led-chip. Instead, with this fixture you can use your existing LED-tubes or new LED-tubes for an easy and fast installation and upgrade. This fixture is compatible with EM LED tubes and starter which you can find on this page. Thanks to the long life span, reduced maintenance costs, quick installation and energy efficient light of LED tubes, a short payback period is guaranteed.
For LED-tube 150 cm
This fixture is compatible with LED tubes of 150 cm that replaces fluorescent tubes of 2x58W. In this fixture you can therefore place 2 LED-tube. On the right side on this page you can find suitable alternatives.
LED-tubes have a long lifetime
LED-tubes have a lifespan of up to 60.000 hours. If the light is on 12 hours a day five days a week, it’s 60 hours per week. In one year, the light is on for 3120 hours. If we split the expected life span with the annual consumption we get a product which lasts for more than 19 years.
These fixtures are waterproof with an IP66. It is therefore possible to use them outdoors or in moist environments indoors.
Impact resistance IK08
This fixture is made in durable polycarbonate. It has an IK08 value which is one of the higher degrees of protection against external impacts.
Withstands temperatures between -15 and +35 degrees C
These fixtures are produced and designed to withstand temperatures between -15 degrees C up to +35 degrees Celsius.
Need help?Contact our light specialists for free advice.
The product is added to your shopping cart.
Your request has been successfully sent!
Our sales team will now contact you shortly. Together with you, we will collect your data and talk about your personal advantages. Thank you for your trust!
We are sorry
Unfortunately you can only request a quotation if you are an installer or a company. You can always use the special tier discounts for our products.